Fire Rebuild & Reconstruction in Lakewood
Lakewood fire repair and rebuilds roofed in Class A fiberglass asphalt shingles, with an ember-resistant ridge vent, metal drip edge and boxed eaves.
Fiberglass asphalt shingles carry a Class A fire rating as a roof covering, which suits a Lakewood house coming back from a fire. An ember that settles on them burns out on the mineral surface without reaching the deck. Those granules also shield the asphalt from hard sun, and sealed strips with extra nails per shingle help the courses stay down when dry wind gusts across an inland lot. Repairs blend in, since single shingles can be swapped.
From deck to ridge
The roof starts with solid sheathing, replaced wherever heat or hose water reached it. An underlayment goes over that, then a metal drip edge at the eaves and rakes so no wood edge is left exposed. Valleys are lined with metal, and step flashing ties the shingles into each wall they meet. At the ridge, a vent listed to resist embers lets the attic breathe without an open slot. The bundles carry the Class A listing, and the product name goes on the plans so the reviewer and the inspector can match it to what is installed.
Gutters, eaves and roof openings
Dry leaves packed in a gutter are fuel sitting at the roof edge, so gutters are metal and fitted with a cover that keeps debris from building up. Eaves are boxed with a solid soffit, and any soffit or gable vent is a listed ember-resistant unit. Bath, dryer and kitchen ducts that leave through the roof end in caps with dampers that close when the fan stops. If the Lakewood parcel is on a mapped fire hazard zone, these details are code. Otherwise each one is quoted on its own line, letting you decide which to add.
About our Fire Rebuild & Reconstruction serviceServices in Lakewood
Fire Rebuild & Reconstruction in Lakewood: common questions
The ceilings come down near the burn so the roof framing can be probed. If the rafters and roof sheathing test firm and the fire stayed in a few rooms, the house is repaired and reroofed. If the roof framing or bearing walls burned through, rebuilding on a checked slab may be simpler. An engineer reviews the frame, and you get both scopes in writing.
Yes. A roof estimate can count shingles and miss the tear-off, sheathing, underlayment, drip edge, flashing and vents that a burned roof needs. We measure the roof, photograph the deck from inside the attic, and mark each missing or short line on the adjuster's estimate, so you can bring it to the insurer.
The first step is finding your parcel on the fire hazard severity zone maps. Inside a mapped zone, Chapter 7A sets the roof class, vents, glazing, siding and eaves. Outside one, the general code applies, and every hardened part becomes an option you can pick on its own.
More work we do in Lakewood
Plan your project in Lakewood
Tell us about the house and the fire rebuild & reconstruction work. We reply about a walk-through and a written scope.