Fire Rebuild & Reconstruction in Santa Monica
Santa Monica fire rebuilds with ember resistant vents, tempered windows and siding picked for salt air, so each part still opens, seals and breathes.
Every hardened part of a rebuilt Santa Monica house gets used, so it has to work without fuss. Windows slide and lock, attic vents move enough air to keep the rooms below comfortable, and deck doors open wide. Salt air is hard on moving parts, so we choose hardware and screens that will not seize. Then we confirm each piece against the wildfire standard before it goes on the plans.
Choosing parts for salt air
Near the ocean, corrosion is the slow threat to a hardened exterior. Ember mesh in plain steel can rust closed, so vent screens are stainless or another corrosion resistant metal. Siding and trim are fastened with stainless or hot dipped galvanized nails. Window frames in fiberglass or a coated metal keep their finish, and the rollers and locks are stainless. Fiber cement is primed on all faces and edges before it goes up, and stucco gets a finish coat that sheds moisture. These grades are listed on separate lines of the quote.
Santa Monica plan review
The City of Santa Monica runs its own building and safety division, and that office reviews the plans and inspects the job. If the state hazard map covers the parcel, the drawings must show a roof rated Class A, listed ember resistant vents, tempered glazing and rated siding and eaves. The lot may or may not also fall inside the coastal zone, which can bring a separate review. We check both maps for your address before drawing, so the plans go in with each requirement already answered.
About our Fire Rebuild & Reconstruction serviceServices in Santa Monica
Fire Rebuild & Reconstruction in Santa Monica: common questions
That depends on how much of the frame and foundation came through. Damage limited to some rooms over sound structure makes a repair practical, and the outside can be hardened as parts are replaced. Structural loss across the house favors rebuilding. We explain the call in a written scope once the damaged areas are open.
We can. The adjuster's lines go beside the house and our own takeoff. Corrosion resistant fasteners, stainless vent mesh and rated windows may be priced as standard parts or left out. We mark each gap with the reason it matters, and you take that list to your insurance carrier.
A parcel inside a mapped fire hazard severity zone has to be rebuilt with a Class A roof covering, ember resistant attic and crawlspace vents, tempered glazing, and rated walls, eaves and decks. If it is not mapped, those parts are your choice. The lot may also need a coastal zone review, which we check for your address.
Fire Rebuild & Reconstruction in other cities
More work we do in Santa Monica
Plan your project in Santa Monica
Tell us about the house and the fire rebuild & reconstruction work. We reply about a walk-through and a written scope.