Windows & Doors in Camarillo

Measuring is step one, ordering is step two and demolition comes much later. See how Fernhill Builders sequences a Camarillo window and door job.

Describe the house and the work

By sending, you agree Fernhill Builders may contact you by call, automated text or email about your request. Consent isn't required to buy. Msg & data rates may apply; reply STOP to opt out. Privacy Policy

Measuring is step one at a Camarillo house, ordering is step two, and demolition trails far behind. Custom units are built to the sizes taken on the first visit, so the old window stays in place until its replacement is on site and checked against the order. Only then does the work move to the wall, one opening at a time.

Before any old frame moves

Paper work leads. The parcel is checked against the fire hazard map, the permit path is confirmed with the building department serving the address, and the glass list is fixed. Units are then ordered to the measured sizes and checked at delivery for size, stamp and frame finish. A unit that arrives wrong goes back before it touches the wall. The stucco around each opening is scored and marked for its patch while the old window is still in. Hardware finish is chosen with salt air in mind where a lot is near the water.

Inside the opening

Once the old window is out, the rough opening gets a square and a probe for soft wood. Flashing tape goes on the sill, up the jambs and across the head last, so water sheds over every layer beneath it. The new unit is shimmed, fastened and sealed on the outside. Foam fills the gap inside, trim follows, and the stucco patch is blended in at the end. Then the next opening starts, and each one gets its own sign-off line in the scope.

About our Windows & Doors serviceServices in Camarillo

Windows & Doors in Camarillo: common questions

Plan your project in Camarillo

Tell us about the house and the windows & doors work. We reply about a walk-through and a written scope.