Fire Rebuild & Reconstruction in El Segundo

El Segundo fire repairs that pull a few bricks or stones from heat-exposed veneer to check the metal ties, air space and flashing before a repair is priced.

Describe the house and the work

By sending, you agree Fernhill Builders may contact you by call, automated text or email about your request. Consent isn't required to buy. Msg & data rates may apply; reply STOP to opt out. Privacy Policy

A brick or stone face on an El Segundo house hides the metal that holds it to the frame. Before we price a repair, a few units come out of the veneer next to the burned wall so we can see the ties, the air space and the paper over the sheathing. Heat can crack the mortar gripping a tie, and hose water, plus damp air near the coast, rusts any steel the fire stripped of its zinc. Each opening is photographed and logged.

What sits behind the veneer

Anchored veneer hangs on corrugated or wire ties nailed through the sheathing into the studs, set to a spacing grid the code fixes. Behind the masonry runs an air space, with a water-resistive barrier on the sheathing and weep holes at the base, so water that soaks through the face drains back out. At each opening we check whether the ties are still bedded in mortar, whether they bend or snap when pulled, and whether the barrier behind them is charred or brittle. Metal flashing belongs at the base and over every window head, and any that is missing or burned goes on the list beside the ties.

Repoint, retrofit or relay

Sound ties under mortar that is only scorched on the surface allow the face to be cleaned and repointed where it stands. Where ties have rusted or let go in scattered areas, helical retrofit anchors drilled through the mortar joints into the studs can restore the grip with the masonry left in place. A face that leans away from the frame, or wide tie failure, means taking the veneer down, renewing the barrier and flashing, and laying it back on new ties of stainless steel or hot-dip galvanized metal. The City of El Segundo permits the work, and the code caps how tall and heavy veneer can go without an engineer's design.

About our Fire Rebuild & Reconstruction serviceServices in El Segundo

Fire Rebuild & Reconstruction in El Segundo: common questions

Plan your project in El Segundo

Tell us about the house and the fire rebuild & reconstruction work. We reply about a walk-through and a written scope.