Full Home Remodeling in Altadena, Drawn for Review
Altadena whole-house remodels with permit sheets that tie each replaced vent, window, wall covering and roof to its listing for Los Angeles County review.
On an Altadena whole-house remodel, the plan reviewer at Los Angeles County Public Works wants every replaced exterior part tied to a product listing or a tested assembly. Parts of Altadena sit in fire hazard severity zones mapped by CAL FIRE, so a lot there can come under ember-resistance rules for its vents, windows, siding and roof. We put those listings on the permit sheets before submittal, so the reviewer can match each part to its rule.
What the exterior sheets show
The exterior sheets carry a callout for each replaced component. Vents are named by product with their ember-resistance listing. Windows are listed with their glazing: multipane units with a tempered layer, or a fire-rated or tested unit. Siding is shown as noncombustible, ignition resistant or a tested assembly, and a roof being redone shows its fire classification. Eaves can be left open where exposed rafters and blocking use protected or ignition-resistant materials, or they can be enclosed with a qualifying soffit, and the sheets show which path the design takes. Attached decks get a note of their own.
Inside the walls, the same review
The county reviewer also reads the structural, electrical, plumbing and mechanical sheets of a full remodel. New headers and any added shear walls carry engineering where code calls for it, the electrical plan shows panel capacity for new circuits, and energy forms cover replaced windows, insulation and equipment. If the house also has fire or smoke damage, the repair and the remodel may be combined in one permit set, with damaged framing and finishes marked on the same sheets. County inspectors then visit at each stage as framing, rough systems and insulation are exposed.
Full Home Remodeling in Altadena: common questions
Yes, and on a mapped lot much of it is required anyway for the parts a remodel replaces. Choosing the items early lets their listings go into the first permit submittal. Parts you keep, such as sound windows or an existing roof, can be upgraded by choice at the same time, each with its own priced line in the scope.
Paperwork and review lead: the scope, then a permit set with the exterior callouts the county needs. Demolition and structural repair follow, then the shell is closed with listed vents, new glazing and cladding. Rough plumbing, wiring and ducts pass inspection before insulation and drywall, and the finishes come last. Phasing can keep part of the house in use.
If your lot is one of the mapped ones, the parts your remodel replaces must meet Chapter 7A. That means listed ember-resistant vents, glazing with at least one tempered layer or a rated or tested unit, siding that is noncombustible or ignition resistant, and a fire-classified covering if the roof is redone. Kept parts may stay as they are, and plan review confirms the parcel status.
Full Home Remodeling in other cities
More work we do in Altadena
Plan your project in Altadena
Tell us about the house and the full home remodeling work. We reply about a walk-through and a written scope.