Sun Valley Windows & Doors, Scanned Before Pricing
Sun Valley window and door quotes start with a thermal camera scan from inside, showing air leaks, failed glass seals and damp framing before a price is set.
On a Sun Valley visit, a thermal camera is pointed at every window and door from inside the house before a quote is written. It shows heat moving through gaps: a stripe of outdoor temperature along a sash that no longer seals, a band at the edge of a door where air slips past, or a cool patch under a sill where trapped water is drying out of the wall.
Reading the heat pattern
The scan works when indoor and outdoor temperatures differ widely, so it is timed for a part of the day when they do. Air leaks show as streaks that start at a gap and fan into the room. A failed seal between panes shows as glass that tracks the outdoor temperature more closely than its neighbors. Damp framing reads cooler than dry wood beside it, and those spots are then checked with a moisture meter. Each image is saved with the opening's tag, so the pattern and the meter reading sit together on the survey.
How the scan shapes the quote
Openings with a leak only at the weatherstrip or a door sweep may need new seals, and the quote says so. Glass that reads as a failed seal in a frame that scans tight is priced for an insert with tempered insulated glass and a coating suited to hard sun on an inland lot. A cool patch under a sill that the meter confirms as wet sends that opening to full-frame work, where the pan and flashing get rebuilt. LADBS issues any permit the scope needs, and each line on the quote carries the image that put it there.
Windows & Doors in Sun Valley: common questions
The camera cannot see tempering, so that check is done with the etched mark and a polarizing lens. On a Sun Valley parcel the state fire hazard map covers, the wildfire chapter accepts a sealed multipane unit holding a tempered sheet, glass block, or a window that has earned a fire rating. A parcel outside the map still needs tempered glass wherever the safety glazing rules list it.
The scan narrows it down. A frame that shows no leaks around its edges and no cool patch below the sill can keep its place and take an insert. Streaks running around the frame itself, or damp framing under it, mean the problem sits behind the old unit, and full-frame replacement is the way to reach it.
The images set the order. Openings with damp framing are scheduled first, because wet wood keeps decaying while it waits. Door glass and low panes with no tempering mark join that first group as a safety item. Leaky but dry openings come next, and units that scan tight wait for a final round, priced apart.
Windows & Doors in other cities
More work we do in Sun Valley
Plan your project in Sun Valley
Tell us about the house and the windows & doors work. We reply about a walk-through and a written scope.