Burbank Windows & Doors, One Wall at a Time
Burbank window and door replacement that starts with the hazard map and permit, then sets tempered glass and solid doors one wall at a time.
The first task on a Burbank window and door job happens at a desk. We look the parcel up on the fire hazard maps, because that answer fixes the glass and door spec before a single unit is priced. Next comes the permit with the City of Burbank, where the work needs one. Only after both are settled are final sizes taken and the order placed, and the install then moves around the house one wall at a time.
Why the map lookup leads
A parcel inside a mapped hazard area has to meet the wildfire code for glazing and exterior doors, and that changes what gets ordered: insulated units with a tempered pane, and door slabs that are solid core, noncombustible or fire rated. Off the maps the same parts remain an option, listed per opening. Settling this before measuring keeps a tempered unit from being ordered twice, since tempered glass cannot be cut down once it leaves the factory. The permit set then names the glass and frame for each opening, so the field inspection checks against a fixed list.
How each wall is worked
On install days furniture is moved back and the floor near the wall is covered. The old units on that wall come out, and each sill is probed for soft wood before the pan flashing goes down. Frames are set, shimmed and fastened, then the gap around each is insulated and sealed. Exterior doors on that wall follow its windows, so any stucco patch is applied once and cures in one piece. Vents on the same wall change to ember-resistant mesh before work moves to the next wall. Jobs in Valley Village, Sun Valley and North Hollywood follow this order, with LADBS reviewing those permits.
Windows & Doors in Burbank: common questions
The code sets a floor of an insulated unit holding at least one tempered pane, and it also accepts glass block or a window that has passed a fire test. That floor applies to a Burbank parcel only when the hazard maps include it, which is the lookup that starts our job. Unmapped lots may still choose the same glass, priced per opening.
It is decided per opening once the sills have been probed. A dry, true frame can hold a retrofit unit, and the stucco around it stays put. Rot, a history of leaks or a frame bent out of true sends that opening to full-frame work, with the flashing rebuilt behind the plaster. The scope gives each window its method and the reason for it.
Start with the wall that carries the most glass near something that could burn, such as a wood fence or a shed close to the house, and include the doors on that wall. Since the install already moves wall by wall, that wall goes first, with its vents and garage door seals done in the same pass. Walls with nothing burnable nearby can be priced as a later stage.
Windows & Doors in other cities
More work we do in Burbank
Plan your project in Burbank
Tell us about the house and the windows & doors work. We reply about a walk-through and a written scope.