Stucco & Exterior Walls in Sun Valley

The top of the wall is where we start. Fernhill Builders checks Sun Valley stucco at the eaves, vents and fascia before the plaster below.

Describe the house and the work

By sending, you agree Fernhill Builders may contact you by call, automated text or email about your request. Consent isn't required to buy. Msg & data rates may apply; reply STOP to opt out. Privacy Policy

Our first look on a visit goes to the top of the wall: eaves, fascia, rafter tails and vents. That is where a stucco wall meets the roof, and where wind-blown debris and, in a fire, embers find a way in. We note what is open, what is wood and what has dried and split. The plaster and base get their turn after that.

Eaves and vents

Open rafter bays let air and debris into the top of a wall. We look at whether they are closed with solid blocking and whether vents carry a coarse screen. A fine-mesh, ember-resistant vent is the standard where ember rules apply, and it is a sensible choice on any wall that gets reworked. Gaps between the plaster and the fascia are noted as well, since a small opening there leads straight into the cavity. A small mirror and a flashlight help us see into bays that are hard to reach.

Fascia, trim and the plaster below

A screwdriver tip tells us which fascia and trim boards have gone soft. Wood that touches the wall near the ground is noted too. Next the plaster below the eaves is sounded for hollow spots, because roof-edge water runs down that stretch first. Everything found is grouped by location in the scope, so the roofline items are done before plaster work begins and the finish coat does not have to be cut open afterward. Loose or missing pieces are counted so the scope can list them.

About our Stucco & Exterior serviceServices in Sun Valley

Stucco & Exterior in Sun Valley: common questions

Plan your project in Sun Valley

Tell us about the house and the stucco & exterior work. We reply about a walk-through and a written scope.