Fire Rebuild & Reconstruction in Burbank
Burbank fire repairs done in a fixed order: close the house to weather, strip wet and smoked material, test what is left, then permit and harden.
On a Burbank house that is still standing, the first task is closing it to the weather. Tarps go over any hole in the roof and plywood over broken glass before a single wall is opened. Next comes tear out of wet and smoke soaked material, then testing of framing and circuits. Only after those results are in do we draw the repair and file it with the City of Burbank.
Why tear out comes before the quote
Charred studs and heat damaged cable hide behind finishes that look almost normal. Pulling the soaked insulation, stained drywall and carpet pad first lets us see the frame, and it stops odor and mold from spreading while decisions are made. We photograph each opened bay, note char depth and wiring condition, and mark which members stay. The repair scope is written from those notes. Ordering replacement windows and vents waits for that scope too, because a warped rough opening has to be squared before a new unit can be measured for it.
Hardening at the right step
Exterior upgrades fit at set points in the job. Vents are swapped while the attic is open for framing repair. Eaves are boxed before the new roof covering goes on. The weather barrier, window flashing and new windows go in together, and the stucco or fiber cement follows after the inspector signs off on the layers beneath it. When the state map shows the parcel inside a hazard severity zone, each of these steps has to follow the state wildfire chapter. If it is not, we list them as upgrades on separate lines so you can pick.
About our Fire Rebuild & Reconstruction serviceServices in Burbank
Fire Rebuild & Reconstruction in Burbank: common questions
The tear out answers most of it. Once wet and smoked material is gone, the frame and slab are in plain view. Sound members with surface char favor a repair. Framing burned through across several rooms, or a cracked slab, favors a rebuild. Either way you get the call in writing, with the parts that stay named.
Yes. Send the adjuster's estimate and we read it against the house as it stands after tear out. Board up, tarping, drying and the code items for a hardened exterior are lines we look for. We note each gap beside the original line. What goes back to the insurer is your call.
It depends on the state fire hazard severity map for your parcel. On a mapped parcel the code asks for multipane glazing with a tempered pane, ember resistant vents, a roof with a Class A rating, protected eaves and rated siding. On an unmapped parcel the standard code governs, and we price those parts as upgrades you can choose.
Fire Rebuild & Reconstruction in other cities
Plan your project in Burbank
Tell us about the house and the fire rebuild & reconstruction work. We reply about a walk-through and a written scope.